Warrior_Unit's Help Page

Warrior_Unit · Post by **Warrior_Unit** » Wed Aug 30, 2017 5:55 pm

Heyo sudomod, im just trying to get all my parts for a Raspberry pi zero Gameboy project and wanted to know what gauge of wires are recommended and what other small things i'll need (Like resistors and there Ohms) If you want my current parts list, please, PM me.

YaYa · Post by **YaYa** » Thu Aug 31, 2017 11:19 am

.28AWG for all connections except power cables which must be .22 or .20AWG.

rodocop · Post by **rodocop** » Thu Aug 31, 2017 11:57 am

Also, you shouldn't need any resistors etc...Unless you plan to do PWM audio and build your own low pass filter. The low pass filter is optional, but you can look at this thread for the resistors and caps needed:

http://www.sudomod.com/forum/viewtopic.php?t=480

Also, if you want more input on your parts, post the list, anyone can look it over and give input.

32teeth · Post by **32teeth** » Thu Aug 31, 2017 12:43 pm

28AWG connections, terminals...
20AWG for power / ground
Kynar Wire if it touches / connects SMD components or capacitive pads

PS, Kynar Wire and Crazy Glue you can do some sexy wire manageme…Show

: Marks v7 with Matrix Infinity and a touch of Kaiser.jpg (210.42 KiB) Viewed 7977 times

BlownUpChiaotzu · Post by **BlownUpChiaotzu** » Thu Aug 31, 2017 1:00 pm

I am preparing for my first build and I bought 22 and 24 AWG. Will this work or do I need to buy different gauge wire?

YaYa · Post by **YaYa** » Thu Aug 31, 2017 1:07 pm

Of course it will work, the only issue you could have is having difficulties to close the case due to too thick wires...

Warrior_Unit · Post by **Warrior_Unit** » Thu Aug 31, 2017 6:21 pm

rodocop wrote: ↑
Thu Aug 31, 2017 11:57 am
Also, you shouldn't need any resistors etc...Unless you plan to do PWM audio and build your own low pass filter. The low pass filter is optional, but you can look at this thread for the resistors and caps needed:

http://www.sudomod.com/forum/viewtopic.php?t=480

Also, if you want more input on your parts, post the list, anyone can look it over and give input.

I will at some point. Using my iPad right now so i dont have the full list

Warrior_Unit · Post by **Warrior_Unit** » Thu Aug 31, 2017 6:45 pm

Quick Question:
Is this a good soldering iron for something like this?
https://www.amazon.com/gp/product/B000A ... 0DER&psc=1

rodocop · Post by **rodocop** » Thu Aug 31, 2017 8:31 pm

Warrior_Unit wrote: ↑
Thu Aug 31, 2017 6:45 pm
Quick Question:
Is this a good soldering iron for something like this?
https://www.amazon.com/gp/product/B000A ... 0DER&psc=1

It looks better than what I have...It has a variable temperature which is great, and Weller is a good brand I believe, should be good!

Warrior_Unit · Post by **Warrior_Unit** » Thu Aug 31, 2017 9:59 pm

Warrior_Unit's Help Page

Warrior_Unit's Help Page

Re: What Gauge of Wires?

Re: What Gauge of Wires?

Re: What Gauge of Wires?

Re: What Gauge of Wires?

Re: What Gauge of Wires?

Re: What Gauge of Wires?

Re: What Gauge of Wires?

Re: What Gauge of Wires?

Part's List

Who is online