Gauging Interest - Button PCB with fully integrated Teensy

prerunnerseth · Post by **prerunnerseth** » Fri Jun 03, 2016 2:51 am

I wanted to see if anyone was interested in a button PCB with the Teensy fully integrated. I'm trying to clear up GPIOs now to use Kites screen configuration. I have already designed the board. I would have to sell them for about $25 for it to make sense for me.

: teensy.JPG (178 KiB) Viewed 11230 times

SidSilver · Post by **SidSilver** » Fri Jun 03, 2016 3:00 am

prerunnerseth wrote:I wanted to see if anyone was interested in a button PCB with the Teensy fully integrated. I'm trying to clear up GPIOs now to use Kites screen configuration. I have already designed the board. I would have to sell them for about $25 for it to make sense for me.

It would be very cool ! But I've already bought a Teensy for my project

Also, a GPIO audio filter (or usb sound card) + amp, with stereo 3.5mm jack, mono HP pins and Volume wheel pins would be really nice !

Robots86 · Post by **Robots86** » Fri Jun 03, 2016 3:11 am

If it saves space, and you offer uk postage, i would be very interested

Fleder · Post by **Fleder** » Fri Jun 03, 2016 3:18 am

Definitely interesting, but it is a bit too expensive to just save space.
Using the PCB and an Arduino Leonardo instead, is about 7$.

But nonetheless, nice work and good luck with this!

yves1984 · Post by **yves1984** » Fri Jun 03, 2016 5:39 am

im intressed.
and i think its a good price.

a pcb board will be about 8.- and the teensy will be about 30.- here in switzerland so for me it will be a realy good price

Ganreizu · Post by **Ganreizu** » Fri Jun 03, 2016 7:17 am

I'm having a lick of trouble fitting everything inside the case and although i'm confident i can make it work, something like this would be a fantastic fall back. Is there any wiring to do at all at that point besides the L/R buttons? That would be such a lifesaver...the wires going to my teensy is taking up basically all the space on the bottom half of my board right now.

prerunnerseth · Post by **prerunnerseth** » Sat Jun 04, 2016 6:50 am

Ganreizu wrote:I'm having a lick of trouble fitting everything inside the case and although i'm confident i can make it work, something like this would be a fantastic fall back. Is there any wiring to do at all at that point besides the L/R buttons? That would be such a lifesaver...the wires going to my teensy is taking up basically all the space on the bottom half of my board right now.

Only wiring that would go to the board would be the USB and LR.

Raktageno · Post by **Raktageno** » Sat Jun 04, 2016 9:08 am

This looks great! Anything to reduce the amount of modding. I have yet to even crack open my DMG, so if it makes the whole process simpler I'm in!

DirtyBullets · Post by **DirtyBullets** » Sat Jun 04, 2016 1:46 pm

maybe if you go ahead with this do the same for Ness and saga controllers for a bigger market.

If i had known about this i would have one too. but too late now...oh well

SpicyCPU · Post by **SpicyCPU** » Sat Jun 04, 2016 2:56 pm

I am Very interested in a button PCB with the Teensy fully integrated. Sounds like it will save time messing around with the build. If you can Get shipping for Canada, You got a customer!!

Gauging Interest - Button PCB with fully integrated Teensy

Gauging Interest - Button PCB with fully integrated Teensy

Re: Gauging Interest - Button PCB with fully integrated Teensy

Re: Gauging Interest - Button PCB with fully integrated Teensy

Re: Gauging Interest - Button PCB with fully integrated Teensy

Re: Gauging Interest - Button PCB with fully integrated Teensy

Re: Gauging Interest - Button PCB with fully integrated Teensy

Re: Gauging Interest - Button PCB with fully integrated Teensy

Re: Gauging Interest - Button PCB with fully integrated Teensy

Re: Gauging Interest - Button PCB with fully integrated Teensy

Re: Gauging Interest - Button PCB with fully integrated Teensy

Who is online