[Eagle] Footprint of Raspberry Pi Zero with Bottom Pads

[VitaliBR]

Hi everyone,

After searching for a Raspberry footprint for the EagleCad and finding only that it has no bottom pads (and I need with bottom pads), I decided to create my own footprint.

I uploaded it to my github, here is the link:
https://github.com/vitalibr/rpi-zero-eagle





Enjoy!

[Woozer]

Awesome, i'll test the footprint.

Hmm, pin 1 should be above the SD testpads? Doesn't look right.

[32teeth]

This is great work!

Recommendations

1. mirror the tDocu (51) layer to bDocu (52)

tDocu (51) mirrored to bDocu (52)

Screen Shot 2018-01-05 at 10.25.42 AM.png (335.33 KiB) Viewed 18808 times

2. 2x20 header... ...square via the correct end

square via on bottom right of header

Screen Shot 2018-01-05 at 10.28.46 AM.png (97.54 KiB) Viewed 18808 times

3. PP5 isn't used by most Gameboy Zero builds, you can get rid of it

PP5 removed

Screen Shot 2018-01-05 at 10.54.56 AM.png (330.12 KiB) Viewed 18806 times

4. You can additionally get rid of the HDMI test points (39,36,20)

5. Labels are nice
Drill holes are removed as this will impact your design as well

Screen Shot 2018-01-05 at 11.11.00 AM.png (249.8 KiB) Viewed 18805 times

Reference

reference

Raspberry-Pi-Zero-Back.jpg (356.49 KiB) Viewed 18808 times