[SOLVED] Trying to make a sd card clone without taking the sd card out of the GBZ

[Mario.Semiglia]

So, method you guys told me definitely works. The micro sd addapter was getting the information, but it takes to much time and I dont have the patient to leave my GBZ pluged in more than four hours when I touch it and feel that is overheating
after the command dd with the 1M took forever as well, I guess this method would work for someone with a smaller micro SD cart... I tried making an image of the micro SD cart after 4 hours of leaving the pi doing it thing and it didnt boot.
So the method works but I wouldnt recommend it for some one with a micro sd bigger than 8G (please correct me on the comments if I am wrong).
So I ordered a ribbon cable and i will make some modifications to my case in order to reach the micro sd card without having to open the case.

Thank you very much for your help guys!

[Mario.Semiglia]

here is the Ribbon cable if you re interested:
https://www.amazon.de/gp/product/B072NL ... UTF8&psc=1
and a picture:

the black plastic case can be really easily opened! thanks to Rodocop for the idea!

[YaYa]

moved the thread to the software section of the forum