[For Sale]HoolyHoo's AIO bracket for Kite's Circuit Sword Board

[djascher]

Regarding bracket I don't need to have it physicaly STL should be fine if available.

Only Hoolyhoo has the print file

If he wants to give you the file for you to make the alignment, that's between the two of you.

That's why, as I wrote, I'm happy to send you my bracket once I get it from Hoolyhoo... if that helps you? I'd imagine it's not as good as the STL file, but still....

[kubino]

Regarding bracket I don't need to have it physicaly STL should be fine if available.

Only Hoolyhoo has the print file

If he wants to give you the file for you to make the alignment, that's between the two of you.

That's why, as I wrote, I'm happy to send you my bracket once I get it from Hoolyhoo... if that helps you? I'd imagine it's not as good as the STL file, but still....

Yes that should work too. We can discus via PM/Email however do not expect the case cuts soon. I'm completely sold out and preorder list is quite long .... (Thanks Kite! )

[HoolyHoo]

Regarding bracket I don't need to have it physicaly STL should be fine if available.

Only Hoolyhoo has the print file

If he wants to give you the file for you to make the alignment, that's between the two of you.

That's why, as I wrote, I'm happy to send you my bracket once I get it from Hoolyhoo... if that helps you? I'd imagine it's not as good as the STL file, but still....

I can provide Kubino the info he needs to make the proper hole alignment if he needs it or wants it.

[kubino]

Regarding bracket I don't need to have it physicaly STL should be fine if available.

Only Hoolyhoo has the print file

If he wants to give you the file for you to make the alignment, that's between the two of you.

That's why, as I wrote, I'm happy to send you my bracket once I get it from Hoolyhoo... if that helps you? I'd imagine it's not as good as the STL file, but still....

I can provide Kubino the info he needs to make the proper hole alignment if he needs it or wants it.

Yes that would be awesome! If you have some draving, not needed complete ST. Even first 1 or 2 layers extracted from Slic3r will help

[djascher]

Yes that should work too. We can discus via PM/Email however do not expect the case cuts soon. I'm completely sold out and preorder list is quite long .... (Thanks Kite! )

Happy to be at the ass-end of the preorder list, as I'm only getting in at this latest Kite round, so plenty of folk have their electronics before me and thus need their case before me.

As you wrote, we'll finalize the case order on PM / email.

(BTW, how long a backorder are talking? Weeks, or months?)

[djascher]

Only Hoolyhoo has the print file

If he wants to give you the file for you to make the alignment, that's between the two of you.

That's why, as I wrote, I'm happy to send you my bracket once I get it from Hoolyhoo... if that helps you? I'd imagine it's not as good as the STL file, but still....

I can provide Kubino the info he needs to make the proper hole alignment if he needs it or wants it.

Yes that would be awesome! If you have some draving, not needed complete ST. Even first 1 or 2 layers extracted from Slic3r will help

Thank you so much for this Hoolyhoo!! Gives me and I'm sure others further assurance that we will produce professional looking end products!!!

[HoolyHoo]

Only Hoolyhoo has the print file

If he wants to give you the file for you to make the alignment, that's between the two of you.

That's why, as I wrote, I'm happy to send you my bracket once I get it from Hoolyhoo... if that helps you? I'd imagine it's not as good as the STL file, but still....

I can provide Kubino the info he needs to make the proper hole alignment if he needs it or wants it.

Yes that would be awesome! If you have some draving, not needed complete ST. Even first 1 or 2 layers extracted from Slic3r will help

Can you work with a DXF file for the needed outline? I can PM you that if it helps.

[kubino]

I can provide Kubino the info he needs to make the proper hole alignment if he needs it or wants it.

Yes that would be awesome! If you have some draving, not needed complete ST. Even first 1 or 2 layers extracted from Slic3r will help

Can you work with a DXF file for the needed outline? I can PM you that if it helps.

DXF is perfect, Thanks!

[Sasherz]

I am about to order a bracket, the:
For PSP Style Bracket with Included Button Well Guides ($16) EU Int. non UK Shipping Only with Tracking ($8)
does this come with the:
Four of Each DIY Install Brass Inserts and M2 Screws Loose (Screws Need to be trimmed to size) ($3)
or do I have to order them on the side, if so, is there any way to add them to a "cart" or do I need to buy twise?

[HoolyHoo]

I am about to order a bracket, the:
For PSP Style Bracket with Included Button Well Guides ($16) EU Int. non UK Shipping Only with Tracking ($8)
does this come with the:
Four of Each DIY Install Brass Inserts and M2 Screws Loose (Screws Need to be trimmed to size) ($3)
or do I have to order them on the side, if so, is there any way to add them to a "cart" or do I need to buy twise?

The bracket does not come with the screws and inserts. You would have to make two separate checkouts but don’t worry the screws and inserts will not be charged shipping. I will combine them manually. Thanks