GBZ PCB Printout

[rivera82falcon]

Is there a printout available for the GBZ PCB? Basic controls like the D-Pad, A, B, select and start that I can print onto glossy paper and transfer to a copper board. I really like that method and it looks easier to start with while I start learning how to use Eagle.

[rivera82falcon]

I guess no one has a jpg/png image of the board to scale so I'll work on it myself (which is fine as I'm enjoying working on this project so far).

One more question: what are these buttons on the pcb called? I'm using DipTrace as it feels easier and more user-friendly to start with (vs. Eagle) but I don't know what the official name for these are.

SpoilerShow

Thank you kitsch-bent for the snapshot!

EDIT:
From what I found:
1) Components: Con_Board_In // 51022-1500
2) Components: Con_Board_In // 51022-0400

If this is wrong please let me know. Thank you all again for looking.

[ABH]

That’s will help you
https://github.com/lazerwalker/lazerboy-pcb

And there's an eagle library for parts he used.
Good luck

[rivera82falcon]

That’s will help you
https://github.com/lazerwalker/lazerboy-pcb

And there's an eagle library for parts he used.
Good luck

Wow! Thank you so much for this!!! I keep forgetting about github for resources but this is perfect.