[Solved] Circuit Sword Lite - USB & Sound not working

[PabloDeluxe]

the USB port on my CSL seems to not be working
- I plug in my usb that's been prepped for NOOBS
- made sure to get my file structure right, putting the RetroPie folder inside
- the USB drive light flashes on for a brief second but the stays off
- connecting my USB drive to the USB micro port with a USB to USB Micro adaptor results in no power or light flashes from the USB drive
- Multiple USB drives Tested
- ribbon cable removed and reconnected
- Reimaged SD card with the 1.0.1 latest build from https://github.com/kiteretro/Circuit-Sw ... e/releases
- read over the guides, the FAQ, the forum
-TESTER mode says everything is OK

- sound also not working, similar to the issue posted here https://www.sudomod.com/forum/viewtopic.php?f=51&t=6806 but without the error in TEST

anyone have any idea on how to fix?

[kite]

So the AUDIO test passes? For the external USB, have you read this: https://github.com/kiteretro/Circuit-Sw ... e-usb-port

[PabloDeluxe]

Thanks Kite, feeling dumb, literally spent hours on the forum trying to find an answer and it was staring me right in the face on the FAQ. must've glanced over it 30 times.... will try tonight and share results. as for the sound, I will investigate further after uploading some roms..

[PabloDeluxe]

Flipped the switch on the back of the board marked USB and was able to upload ROMs just fine.
Made sure to switch it back so the sound could work and the sound worked fine.

Everything turned out perfectly, thanks for the great board Kite!