Battery for the Gameboy Zero

[yves1984]

found this battery: http://www.aliexpress.com/snapshot/7658 ... 1149103113
without the JST 2P but that will not so a problem to do this

and it fits perfectly in the battery bay (Size: 7.8(H)*52(W)*51(L))

[_N0x]

Looks good but wft 60 days delivery time???
Is this thing delivered by bycicle?

[RasputiNZ]

Why can't you just use thin cell phone batteries?

This seems to be a precursor to this: http://stevesprojectpages.com/battery-board-v0/

[Popcorn]

I'm pretty sure I found a 3200+ MaH battery that would fit when I was digging. You can definitely get into the sub 4K range with that space.

[Jack]

I just ordered a 2600mah 52x52x7,8 on Ali. Not the one from the link above because shipping was 50 Euro.
Hope 7,8 thick is possible?

Popcorn...link? Maybe I can still cancel this one...

[Popcorn]

I just ordered a 2600mah 52x52x7,8 on Ali. Not the one from the link above because shipping was 50 Euro.
Hope 7,8 thick is possible?

Popcorn...link? Maybe I can still cancel this one...

I lost the link now after digging eBay and googling for hours and hours on different battery sizes. If I find it, I'll send your way. As I mentioned, I went for that crazy massive 1ah battery that I know won't fit.

But one of the best options I remember was the one that @Fleder found. That guy can build custom batteries to fit your size and he stated he could stack two of these in a parallel two-cell setup to give you 3900mAh. Which are sadly presently out of stock. Worth it to contact him and see though.

http://shop.lipopower.de/1950-mAh-37V-Einzelzelle-1C

[crispy_tofu]

Do you think cell balancing would be an issue with multiple batteries? I'm actually thinking of doing this in my build if I have the space (and time)...

[Popcorn]

From everything ive read on the topic, multicell batteries should only ever be done directly from the factory where they are properly paired off the same production run otherwise if you have any difference in the cells, you'll run into all sorts of charging and draining issues really quickly. This is why I was a bit weary of going to that guy above who claimed he could make a custom multicell.

After some quick googling, I found this one, and this is a proper 3 cell multicell, from the factory.

https://www.sparkfun.com/products/8484

Unfortunately though, I think it might be a wee bit too high. From when I measured it, there was only a max of 15mm of height. Shame. But just another example that bigger batteries that fit within the 65mm x 55mm x 15mm might still exist out there!

Maybe it's possible to find the 2 cell version of this which would be 4000mAh and would be able to fit properly.

[otaola.franc]

hello
i currently have a battery a lot bigger than the one that says in the guide and i would love if someone can confirm me if it still fits.
i have a 6000mAh LiPo battery pack 13x51x78mm and because i dont have any other proyect in mind i would love to use it because if not i will have to buy one and the shippment it is really expensive...
thanks

[Thijs852]

Hi jack,

Check out https://www.kiwi-electronics.nl/betaal- ... informatie they ship to belgium. And if you contact them they cannorder stuff from adafruit gfor you so you won't have to pay the big shipping cost. That what i did they ordered some stuff for me and i wil pick it up in there shop so I do not have to pay the shipping cost!