Difference between revisions of "GBZ Misc Hardware"
From sudomod
m |
|||
| Line 11: | Line 11: | ||
==Audio Jack== | ==Audio Jack== | ||
In case you can not use the audio jack of the original GBZ board [http://www.banggood.com/25Pcs-3_5MM-Two-Channel-Audio-Jack-Socket-For-Headphone-Earphone-Headset-Microphone-p-1059606.html?p=9B1915347037201311DI here] is a replacement. | In case you can not use the audio jack of the original GBZ board [http://www.banggood.com/25Pcs-3_5MM-Two-Channel-Audio-Jack-Socket-For-Headphone-Earphone-Headset-Microphone-p-1059606.html?p=9B1915347037201311DI here] is a replacement. | ||
| + | |||
| + | ==Power Switch== | ||
| + | If you don't have the power switch from the GBZ board or are unable to desolder it you can use [http://www.banggood.com/5pcs-6-Pins-Slide-Switch-OnOn-Vertical-Mini-Miniature-Terminals-p-993806.html?p=9B1915347037201311DI this switch]. | ||
Revision as of 07:26, 17 July 2016
Contents
GPIO PWM Audio for Raspberry Pi Zero
150 Ohm resistor, 270 Ohm resistor, 10nF capacitor, and a 33nF capacitor (another 10nF will work fine as well if that’s easier to find)
L/R Buttons
If you want to use tactile switches in the rear screwholes like the original GBZ, you'll need something similar to this: http://www.amazon.com/9-5mm-Momentary-Tactile-Button-Switch/dp/B008420WOA or this
Replacement case
A replacement case for the gameboy can be found here.
Audio Jack
In case you can not use the audio jack of the original GBZ board here is a replacement.
Power Switch
If you don't have the power switch from the GBZ board or are unable to desolder it you can use this switch.
