Difference between revisions of "GBZ Misc Hardware"
From sudomod
m (→L/R Buttons) |
m |
||
| Line 4: | Line 4: | ||
If you want to use tactile switches in the rear screwholes like the original GBZ, you'll need something similar to this: | If you want to use tactile switches in the rear screwholes like the original GBZ, you'll need something similar to this: | ||
http://www.amazon.com/9-5mm-Momentary-Tactile-Button-Switch/dp/B008420WOA or [http://www.banggood.com/100Pcs-Tactile-Push-Button-Switch-Tact-Switch-6X6X10mm-4-Pin-DIP-p-1000844.html?p=9B1915347037201311DI this] | http://www.amazon.com/9-5mm-Momentary-Tactile-Button-Switch/dp/B008420WOA or [http://www.banggood.com/100Pcs-Tactile-Push-Button-Switch-Tact-Switch-6X6X10mm-4-Pin-DIP-p-1000844.html?p=9B1915347037201311DI this] | ||
| + | |||
| + | |||
| + | ==Replacement case== | ||
| + | A replacement case for the gameboy can be found [http://www.banggood.com/OEM-Full-Housing-Shell-for-Nintendo-Gameboy-Classic-GB-DMG-Console-p-973616.html?p=9B1915347037201311DI here]. | ||
Revision as of 13:14, 31 May 2016
GPIO PWM Audio for Raspberry Pi Zero
150 Ohm resistor, 270 Ohm resistor, 10nF capacitor, and a 33nF capacitor (another 10nF will work fine as well if that’s easier to find)
L/R Buttons
If you want to use tactile switches in the rear screwholes like the original GBZ, you'll need something similar to this: http://www.amazon.com/9-5mm-Momentary-Tactile-Button-Switch/dp/B008420WOA or this
Replacement case
A replacement case for the gameboy can be found here.
